Servo Mode; Setting Servo Flash Mode; Pre-Flash Suppression Or Synchronisation Settings - Metz Mecablitz 52 AF-1 Pentax digital Bedienungsanleitung

9.5 SERVO mode

SERVO mode is a simple slave mode without
or with complete pre-flash suppression in
which the slave flash unit always triggers a
flash as soon as the camera flash unit recei-
ves a light pulse.
In SERVO mode, only manual flash mode is
possible. Manual flash mode is automatically
activated after switching to SERVO mode.

9.5.1 Setting SERVO flash mode

• Set the camera to TTL mode.
P TTL
• Press the sensor button of the displayed
mode of operation on the touch display as
-7,9 m
0,7
many times as it takes for the display for
m
Z
35 F4.0
OOM
m selecting the mode of operation to appear.
EV
INFO
• Press the
SLAVE
touch display and select „SERVO" .
SERVO
• Press the
touch display.
The mode of operation is adopted.
SYNC
M-SERVO
If desired, partial light output can be set,
Z
24 mm
OOM
see 9.4.3.
INFO P
sensor buttons on the
SERVO
sensor button on the
9.5.2 Pre-flash suppression or
synchronisation settings
• Set the camera to TTL mode.
SYNC
M-SERVO
• Press the sensor button
display as many times as it takes for the
Z
24 mm
OOM
display for selecting the type of synchroni-
sation.
INFO P
• Press the sensor button on the touch
SYNC
display:
synchronisation without pre-flash
synchronisation with pre-flash
The mode of operation is adopted.
Learn
If the synchronisation set here does not work
properly, then proceed as described in 9.5.4.
SYNC
on the touch
k
161