Metz Mecablitz 52 AF-1 Pentax digital Bedienungsanleitung Seite 154

Automatic adjustment occurs for lens focal
lengths from 24 mm.
The automatic adjustment will not be activa-
ted if the reflector is swivelled, if the wide-
angle diffuser
Mecabounce (accessory) is mounted.
If so desired, the position of the reflector can
be manually adjusted in order to achieve par-
ticular lighting effects (such as spot effect
etc.).
Manual zoom mode
The zoom position of the reflector must be
adjusted manually to the lens focal length
when used with a camera that doesnít trans-
mit the data related to the lens focal length.
+
In this case auto-zoom mode is not possible!
k
After switching on the flash unit, „Zoom"
appears in the display and the current zoom
position of the reflector appears.
154
is pulled out, or a
Setting procedure
• Press the
for the selection menu to appear.
• Press the
touch display.
EV
• Press the
ZOOM touch display and select "Zoom".
• Press the
touch display.
50 • Press the
touch display and select the desired zoom
70
value.
85
• Press the selected correction value on the
touch display, e.g
After around 10 seconds, the operation dis-
play appears, or press the
repeatedly until the operation display
appears. The following zoom positions are
possible for the reflector:
24 - 28 - 35 - 50 - 70 - 85 - 105 mm
(35 mm format).
Tip:
If you do not necessarily need the full guide
number and maximum flash range of the
flash unit, you can leave the zoom reflector at
the position for the shortest focal length of
the zoom lens.
D
button as often as it takes
PARA
sensor button on the
sensor buttons on the
Zoom
sensor button on the
sensor buttons on the
70
.
D
button