Info; Auto Off For The Flash Unit - Metz Mecablitz 52 AF-1 Pentax digital Bedienungsanleitung

The options can be set after pressing the
OPTION
button.
SYNC, (Contrast-control), see 10.4
ZOOM SIZE (shooting format adjustment),
see 10.2.4
ZOOM MODE (illumination),
see 10.2
STANDBY (autom., unit switch-off),
see 3.6
MOD.LIGHT (modelling light), see 10.1
AF BEAM (AF auxiliary light), see 10.3
m / ft (metres / feet), see 10.7
In the menus shown on the flash unit, all
fields that have a black background are confi-
gured as sensor buttons that can be pressed
for modifications/changes in the menu.
In the images in the user's guide, only the
sensor buttons that must be pressed for set-
ting the described function are marked in
black.

3.5 INFO

P TTL
The current settings of the flash unit can be
-7,9 m
0,7 displayed during operation.
m
Z • Press the
F4.0
35
OOM
m
touch display. Info panel 1 appears.
EV
INFO
- Spot zoom mode (SP) is set, (see 10.2.2).
- Shooting format adjustment (ZOOMSIZE)
(see 10.2.4)
- AF auxiliary light (AF BEAM OFF) is switched
off, (see 10.3).
- Modelling light (MOD.LIGHT) is set,
(see 10.1).
- Contrast control (C
(see 10.4)
- The automatic unit switch-off is set for
---------- INFO ----------
10 minutes (see 3.6).
4 4,0
F
- The temperature display increases after
435 mm
A.Z
oom
intensive use.
4 400
ISO
• While info panel 1 is being displayed, press
4 +1
EV
the touch display once again.
Info panel 2 will be displayed.

3.6 Auto OFF for the flash unit

The flash unit is factory-set to automatically
switch to standby mode (Auto OFF) 10 minu-
tes after
• being switched on,
• a flash is fired
INFO
sensor button on the
C CC)
ONTR. TRL. =
143
k