Connections; Paper; Paper You Can Use - Sony UP-897MD Gebrauchsanweisung

Connections

Notes
• Turn off the power to each device before making any
connections.
• Connect the AC power cord last.
Video equipment
to video output
connector
Connecting cable
(BNC y BNC)
(not supplied)
to VIDEO IN
to REMOTE
75 Ω select
switch
SF-24 RM-91 remote
foot switch control unit
(not supplied) (not supplied)
a) Set the 75 Ω select switch as follows.
ON: When nothing is connected to the VIDEO OUT
connector, set the switch to this position.
OFF: When a video monitor or other video equipment is
connected to the VIDEO OUT connector, set the switch
to this position.
42
Connections / Paper
Color/black and
white video monitor
to video input
connector
Connecting cable
(not supplied)
to VIDEO OUT
to - AC IN
AC power cord
a)
to wall outlet

Paper

Use only Sony UPP-110S/110HD/110HG paper
designed for use with this unit. High print quality cannot
be guaranteed if any other paper is used with this unit,
and such paper could damage the unit.
You cannot use the UPP-110HA as specified for the
UP-880/890MD series printer.

Paper You Can Use

Print paper characteristics are as follows.
Print Characteristics
TYPE I (Normal)
TYPE II (High Density)
TYPE V (High Glossy)
Notes on storing and handling paper
Do not re-use
Doing so may result in malfunction and
negatively affect printing results.
Storing unused paper
• Stored unused paper at a temperature below 30°C
(86°F) in a dry location that is not exposed to direct
sunlight.
• Do not store unused paper near volatile liquids or
allow the paper to contact any organic volatile liquid,
cellophane tape, or any compound of vinyl chloride.
Loading paper
• Handle the paper carefully when loading to avoid
touching the printing surface with your fingers.
Perspiration or oil from you hands could cause
pictures to blur.
• After removing the label from the leading edge of the
paper, pull the paper out 15~20 cm (about 6~8 in.)
before printing. Label adhesive remaining on the
paper could spoil a picture.
Storing printouts
• To prevent printouts from fading or changing color,
store them in a cool, dry location where the
temperature is not higher than 30°C (86°F).
• Store printouts in a polypropylene pouch or between
sheets of paper that contain no plastic.
• Do not store printouts where they will be exposed to
direct sunlight or high humidity.
• Do not store printouts near volatile liquids or allow the
prints to contact any organic volatile liquid,
cellophane tape, or any compound of vinyl chloride.
• To prevent fading, do not stack printouts on or under a
diazo copy sheet.
• To mount printouts on another sheet of paper, use
double-sides tape or a water base adhesive.
• Do not incinerate waste printer paper.
Paper Type
UPP-110S
UPP-110HD
UPP-110HG