Basic Menu Operations - Sony UP-897MD Gebrauchsanweisung

d) The print direction of the images printed is as follows.
Image displayed on the monitor
Printouts
When S:STD is selected.

Basic Menu Operations

This section describes the basic menu operation which
are common to each menu, taking "How to set the
printing direction" as an example.
1
Press the power ON/OFF switch to ON to turn the
unit on.
The back light on the LCD lights in green.
LCD
When S:SIDE is selected
2
Confirm that "READY" is displayed on the LCD,
and press the jog dial.
The unit enters the menu mode.
When you perform a menu operation for the first
time after you purchase the unit, the top item of the
"AGC" menu is displayed.
If you have performed a menu operation already,
the item that you set last is displayed.
3
Display "DIR" by turning the jog dial up or down.
4
Press the jog dial.
The unit enters the mode in which you can select
the printing direction.
"DI:NOR," which is the factory setting, is
displayed on the LCD. "DI:NOR" is the currently
selected setting.
In this menu operation, you will change the setting
to "DI:REV."
Adjustments and Settings Using the Menu
49