3.5.3 Measurement Start/Stop and Display Changes
When the START/STOP switch
~
(Fig. 3.7) is depressed,
the detector will traverse for a specified distance (31mm)
and automatically return to its initial position.
Measurement results are not displaYed.
3.5.3 Starten und Stoppen des Meivorgangs und Ander-
rungen der Anzeige
Wenn der Start/Stop Schalter (5) (Abb. 3.7) gedruckt
wird, bewegt sich der Detektor uber eine bestimmte
Strecke (31 mm) und kehrt automatisch auf seinen
Ausgangspunkt zuruck.
Me&rgebnisse werden nicht angezeigt.
0
START/STOP
CD
<J)
<3>
Fig.3.10
Motion of the detector and transition of display state
Abb. 3.10 Bewegung des Detektors und Anderung des Anzeigezustands
. Pressing the START/STOP switch
(5) (Fig. 3.7) while
the measurement is in progress will abort the measure-
ment,
immediately
returning
the
detector
to
its
initial
poSition.
See Fig. 3.10 for resulting changes in display.
. Drucken der START/STOP-Taste
(5) (Abb. 3.7.)
wahrend des Me6vorgangs unterbricht diesen,
dabei kehrt der Detektor unmittelbar wieder in seine
Ausgangsstellung zuruck.
Siehe Abb. 3.10 betr. Anderungen in der Anzeige.
34