Herunterladen Inhalt Inhalt Diese Seite drucken

General Informa- Tion And Installation - Siemens SIREC D Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1.1 GENERAL INFORMA-
TION AND INSTALLATION
1.1.1 Purpose.
allows you to export files from the SmartView disk
to a format compatible to spreadsheet programs.
This software is to be run on PC Windows
®
®
and Windows 95
/98
can export both Point and Alarm/Event files. The
files produced be the Recorder are in MSDOS
compatible format. The Windows
can be used to copy, move, save, and/or rename
the files.
1.1.2
Installation.
®
Windows
3.1 and Windows 95
systems is as follows:
1. Insert the floppy disk into your PC computer
disk drive.
®
2. Use the Windows
lect the File/Run menu item or in Windows 95
select Start/Run. A Dialog Box like the one
shown in Figure 1 will appear.
Figure 1 Windows 95
Siemens AG C79000-G7374-C211-01
SIREC D Manual
Appendix A
GETDATA-SOFTWARE
The Getdata Software
®
3.1
operating systems. You
®
®
File Manager
Installation
on
®
operating
Program Manager to se-
®
®
Run Dialog Box
3. Type in A:/Setup or B:/Setup, depending
upon which drive you inserted the disk in, and
click on the OK button. In Windows 95
may also select the BROWS Button and find
the Setup File on the disk and then click on the
OK Button. The software program will then start
to automatically install the Getdata program
onto your computer.
4. After the program starts installing, another
dialog box will appear as shown in Figure 2.
This dialog box will show the default location for
the Getdata program files to be stored on your
computer.
Figure 2 File Location Dialog Box
5. If you accept the default location, as shown
on the Figure 2 dialog box, then click on the OK
button. If you want the files to be located on a
different drive or in a different directory or sub-
directory, then click in the text box portion of the
dialog box and type in your preference. The
program files will then be stored in your pre-
ferred location.
1.1.3 Running the Program.
the program, click on the icon in the Program
®
Manager (Windows
3.1) or click on Start -
Programs - Get Data - Get Data (Windows 95
®
you
To run
®
).
A-1

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis