Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
C. Bypass Point -
active points from the measurement cycle. A
bypassed point will still be in the database and the
message BYPASSED will display when the
bypassed point appears on the display or is
printed. To Bypass a point or points, use the
following instructions and Figure 3-34:
1. Press the FUNCTION Key and use the UP (↑)
or DOWN (↓) Arrow Keys to highlight "Bypass
pt".
2. Press ENTER and the pop-up display will read
"point? X".
3. Use the numeric keypad to enter the point to
bypass and press ENTER. The display will then
scroll to the next point in sequence.
4. Use the above procedure to bypass any addi-
tional points. When finished, press EXIT to return
to the "Bypass pt" menu display.
0 4 /1 6 /9 7
E N T E R
0 4 /1 6 /9 7
E N TE R
0 4 /1 6 /9 7
1 0 3 7 2 4 M A
Figure 3-34 Bypass Points Flow Chart
3-18
This menu item removes
4:5 9 :2 9
4 :5 9 :2 9
P oint? 1
A
7
8
B
4
5
C
3
2
E X IT
4 :5 9:2 9
D. Reset Point -
Resettable Point Types. The value of the following
types of calculated points may be reset:
•
Time Average
•
High Peak
•
Low Peak
•
Totalize
1. Press the FUNCTION Key at the "COMMAND"
prompt and use the UP (↑) or DOWN (↓) Arrow
Keys to highlight "Reset pt".
2. Press ENTER and the display reads "point?
X".
3. Use the numeric keypad to select the point to
reset. Press ENTER and the next sequential
point will be displayed.
4. When resetting points is complete, press EXIT
to return to the "Reset pt" menu item.
E N TE R
9
6
1
E N T E R
10 3 7 2 5 M A
Figure 3-35 Reset Point Flow Chart
This function forces a reset for
Resets data to the current
value of the base point
Resets data to the current
value of the base point
Resets data to the current
value of the base point
Resets to zero
0 4 /1 6 /9 7
4 :5 9 :2 9
0 4/1 6 /9 7
4 :5 9 :2 9
0 4 /1 6 /9 7
4 :5 9 :2 9
Point? 1
A
7
8
B
4
5
C
3
2
0 4 /1 6/9 7
4 :5 9 :2 9
Siemens AG C79000-G7374-C211-01
SIREC D Manual
9
6
1
E X IT
Werbung
Kapitel
Inhaltsverzeichnis
