Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
I. Trend Message -
manually print one of the six Event Messages (refer
to Chapter 4) to the Alarm / Events Window and
Alarm file. To select an Event Message, perform
the following steps and refer to Figure 3-40:
1 X X X X X X
1 0 4 0 2 6 M A
Figure 3-40 Select Message to Display Flow
1. Press the FUNCTION Key at the "COMMAND"
prompt and use the UP (↑) or DOWN (↓) Arrow
Keys to highlight "Trnd Message". Press ENTER
and "1 XXXX" will display where 1 is Event mes-
sage 1 and XXXX is the Event message that will
print.
2. Use the UP (↑) or DOWN (↓) Arrow Keys to
select the correct Event message and press
ENTER. The display will return to the "Trnd Mes-
sage" menu item and the Event entry will be
made.
Siemens AG C79000-G7374-C211-01
SIREC D Manual
This menu item is used to
0 4 /1 6 /9 7
4 :5 9 :2 9
0 4 /1 6 /9 7
4 :5 9 :2 9
0 4 /1 6 /9 7
4 :5 9 :2 9
Chart
3.5.5 Hidden Menu.
allows you to do the following functions:
•
Initialize
•
ADC Control
•
Diagnostics
The Hidden menu can only be accessed by
pressing the MENU key immediately followed by
pressing the upper right-hand corner of the
display. This is the only combination that will work.
A. Initialize -
The Initialize Menu allows you to
perform the following:
•
Init Profile
•
Clear Points
•
Erase Config
CAUTION
USE OF THE ABOVE MENU ITEMS WILL
CLEAR
SYSTEM
REFER
TO
CHAPTER
EXPLANATION OF THE FOLLOWING
MENU OPTIONS.
1. Instructions - To initialize the unit, use the UP
(↑) or DOWN (↓) Arrow Keys to highlight "Initial-
ize" from the Hidden menu and press ENTER.
There are three choices:
a. Init Profile -
tialization by selecting this Menu Item and
pressing ENTER. Refer to Paragraph 3.2.2.D
for details.
b. Clear Points - Restore all points to the un-
programmed state. This will clear any invalid
setup data.
c. Erase Config - Set all data to zero, clear all
memory. USE WITH CAUTION! Will cause the
unit to RESET.
2. Use the UP (↑) or DOWN (↓) Arrow Keys to
highlight the menu item of choice and press
ENTER. Proceed with caution. Note that any
cleared point can be restored in the Point setup
menu.
Operation
The Hidden menu
CONFIGURATION.
4
FOR
AN
Perform a Smart or Full Ini-
3-21
Werbung
Kapitel
Inhaltsverzeichnis
