Alarms; Junction Temp; Bar Assign; Digital Assig - Siemens SIREC D Handbuch

D. Alarms -
The Alarms Power Up display will jog
all points in alarm at the programmed display rate. If
all points are in alarm, each point will be displayed
at the display rate in the Status Window. If no points
are in alarm, the unit Power Up display prompt will
be "NO ALARMS". To program the powerup display
to Alarms, follow the instructions below and refer to
Figure 4-6.
1. Press the Menu Button on the Display Button
Bar. The Command Button Bar will display.
2. Press the PROGram Button on the Command
Button Bar. The Program Menu Box will display.
3. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Displays" and press the
ENTER Button. The Displays Menu Box will dis-
play.
4. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Alarms" and press the
ENTER Button. Alarms is now your Powerup Dis-
play.
5. Press EXIT as needed to return to the Display
screen.
E. Junction Temp -
Up display will display the temperature in Degrees F
(°F) (Degrees C (°C) with European Time format
selected) of the cold junction reference compensa-
tor in the Status Window. To program the Powerup
Display to Alarms, follow the instructions below and
refer to Figure 4-6.
1. Press the Menu Button on the Display Button
Bar. The Command Button Bar will display.
2. Press the PROGram Button on the Command
Button Bar. The Program Menu Box will display.
3. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Displays" and press the
ENTER Button. The Displays Menu Box will dis-
play.
4. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Junction Temp" and press
the ENTER Button. Junction Temp will now be
your Powerup Display.
5. Press EXIT as needed to return to the Display
screen.
Siemens AG C79000-G7374-C211-01
SIREC D Manual
The Junction Temp Power

4.4.6 Bar Assign.

option allows the user to assign specific points to
the individual bars in the bar graph display. To as-
sign points to the bargraph, follow the instructions
below and refer to Figure 4-6.
1. Press the Menu Button on the Display Button
Bar. The Command Button Bar will display.
2. Press the PROGram Button on the Command
Button Bar. The Program Menu Box will display.
3. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Displays" and press the
ENTER Button. The Displays Menu Box will dis-
play.
4. Use the Up (↑) or Down (↓) Arrow Keys, on the
Button Bar, to scroll to "Bar assign" and press the
ENTER Button.
5. The screen will show a pop-up dialog box with
the current Bar Assignment for Bar 1 such as "bar
1 = pt X".
6. Use the Up (↑) or Down (↓) Arrow Keys, on the
pop-up dialog box, to scroll to the desired point to
assign to bar 1 and press the ENTER Button.
7. When the ENTER button is pushed, the Bar
Assign window, in the pop-up dialog box, will
show Bar 2 assignment. Follow steps 5 and 6 to
assign points to Bars 2 through 6. Press ENTER
after Bar 6 is assigned and the screen will return
to the "Bar assign" menu item. Press EXIT as
needed to return to the display screen and button
bar.
4.4.7 Digital Assign.
menu option allows you to assign specific points to
the individual Digital Displays (Total of 6) in the
Digital Window display. The Digital Windows are
displayed as two rows of three displays, numbered
1 to 3 across the top, and 4 to 6 across the bottom.
Selecting point 0 effectively turns the Digital
Display off but does not remove it from the
display.
To assign points to the Digital Display Window,
follow the instructions below and refer to Figure 4-6.
Programming
The Bar Assign menu
The Digital Assign
NOTE
4-11