Migatronic Green Pointer Pro Betriebsanleitung Seite 7

MIGATRONIC A/S
Contents
General description of the machine .................................................................... 8
Delivery contents ................................................................................................ 8
Initial operation and transport ............................................................................. 8
Operating equipment .......................................................................................... 8
Safety provision .................................................................................................. 9
Fastening of electrode in the electrode holder ................................................... 9
Setting the grinding angle ................................................................................... 9
Maintenance ..................................................................................................... 10
Replacement of grinding wheel ........................................................................ 10
Field of application ............................................................................................ 10
Technical specifications .................................................................................... 10
Training ............................................................................................................. 10
Safety data sheet for grinding liquid .......................................................... 30 - 32
Spare parts list .................................................................................................. 42
Drawing ............................................................................................................. 43
IMPORTANT SAFETY INSTRUCTIONS
When installing and operating the machine
the safety rules enclosed
SUPPLIER'S DIRECTIONS
should be read and strictly observed.
This instruction manual and the accompanying supplier's instruction
for use must be accessible at all times to staff engaged in the
installation, operation and maintenance of the machine.
DISPOSAL
Worn-out electrical equipment must be separately collected and handed over
for reuse according to EU-directive 2002/96 EU. Dispose of the product
according to local standards and regulations. www.migatronic.com
7