Technical Data - Unitest Hexagon 120 Bedienungsanleitung

Technical Data

8.0 Technical Data
Display: ............................3
Total display: ....................4.000 digits
Display rate: ....................3 measurement/s
Polarity display: ................automatic
Overload display: ..............0.L is displaced
Battery status display: ......Display of battery symbol
..........................................(< approx. 2.4 V)
Auto Power Off: ................after approx. 30 min.
Overvoltage category:........CAT II 1000 V, CAT III 600 V
Degree of contamination: ..2
Power supply:....................2x1.5 V batteries, IEC LR03
Consumption: ....................approx. 3.2 mA (typical)
Consumption
(Auto Power Off): ..............
Dimension: ........................198 x 97 x 55 mm incl. holster
Weight: ..............................approx. 396 g (incl. holster)
Environmental Conditions:
Operating temperature:......0...35°C (0...80% rel. humidity)
Storage temperature: ........-20...60°C (0...80% rel. humidi-
Height above sea level: ......up to 2000 m
Overload protection:
FS1: 500V FA 0,63A (Ferraz Shawmut, Order No.: C084205
or with comparison value) UNITEST Order No.:
ES630MAF0000
FS2: 500V FA 12,5A (Ferraz Shawmut, Order No.:
D085448 or with comparison value)UNITEST Order
No.: ES12500MAF00
The indications refer to 23°C ± 5°C at <75% rel. humidity
48
3
/ digits, LCD
4
Hexagon 110,120 approx. 300 mA
3
5...40°C (0..70% rel. humidity)
ty) (with battery removed)