Continuity Test - Unitest Hexagon 120 Bedienungsanleitung

Carrying out Measurements
The UNITEST Hexagon 110 and 120 are equipped with
an acoustic socket control feature (ASC). If a test lead
connection is faulty an acoustic signal is emitted.

5.4 Continuity Test

Prior to any continuity measurement, it must be en-
sured that the resistance to be tested is not live. Any
failure to respect this prescription can lead to serious
corporal injury or instrument damage. Furthermore,
external voltages falsify the measurement result.
Select W measurement range using the measurement
function selection dial.
Connect the black test lead to the COM socket and the
red test lead to the
The resistance measurement range is pre-set. The
SELECT key is used to select the measurement func-
tion. The
Connect the test leads to UUT.
The measurement result is displayed on the display and
indicated by an acoustic signal.
The UNITEST Hexagon 110, 120 are equipped with an
acoustic socket control feature (ASC). If a test lead
connection is faulty an acoustic signal is emitted.
38
symbol appears on the display.
UNITEST Hexagon 130
mA
μA
Ω
Hz
V
V
OFF
mA μA
A
socket.
®
A Temp
Temp
Ω V
COM
+