Frequency Measurement - Unitest Hexagon 120 Bedienungsanleitung

Carrying out Measurements
If during the measurement process, the display is difficult
to view or is fluctuating, the measurement data can be
frozen by pressing the Hold key.
The UNITEST Hexagon 110, 120 are equipped with an
acoustic socket control feature (ASC). If a test lead
connection is faulty an acoustic signal is emitted.

5.2 Frequency Measurement

In order to avoid electrical shock, the valid Safety and VDE
regulations with respect to high contact voltage must be
complied with when working with voltage exceeding 120 V
(60V) DC or 50 V (25 V) rms AC. The values indicated in
brackets are valid for limited areas (such as e.g. medicine,
agriculture).
Select Hz measurement range using the measurement
function selection dial.
Connect the black test lead to the COM socket and the
red test lead to the Ohm/Volt/Cond/ socket.
Connect the test leads to UUT.
Read the measurement result on the display screen.
36
UNITEST Hexagon 130 ®
A Temp
mA
μA
Ω
Hz
V
V
OFF
Temp
mA μA Ω V
A COM
+