Programming The Cln Group Cleaning Mode; Programming The Eco Mode; Turn Off Pid Display Feature - Profitec Pro 600 Bedienungsanleitung

6.3.3

Programming the CLN group cleaning mode

With the PRO 600 you have the option to program a reminder for next the group cleaning at the PID display.
The machine is set to 0 at the time of delivery, so no reminder is programmed yet.
Please take the following steps to program the cleaning reminder:
–
+
at the same time and "t1" will appear on the display. Press
Press and
–
button until you reach "CLn". Press
the
Now you can carry out the programming in steps of 10 (0-200) by pressing
–
+
and . In order to leave the programming mode, wait a short time and the
menu will be left automatically.
For example, if you have programmed 90, then you will be prompted with a
"CLn" on the display to clean the brew group after 90 brewing cycles. Clean
the brew group in such a manner that the brew group is flushed with at least
10 brewing cycles until the temperature indication re-appears on the display
(see 7.2 Brew group cleaning, page 28).
We recommend a cleaning of the brew group after about 90 to 140 brewing cycles. As a
brew cycle only a brew over 15 seconds is counted.
6.3.4

Programming the ECO mode

The ECO mode gives you the opportunity to set an automatic switch off after a preset time. After the last
brewing process, the machine will start a Countdown of the preset time. The countdown will be running in the
background. When the countdown is finished the Machine will automatically turn off. To reactivate the
Machine, move the brew lever into the upper position and the Machine will heat-up again. You can also
switch the mainswitch Off and On again.
1. Switch on the machine.
–
+
at the same time and "t1" will appear on the display.
2. Press and
–
button until you reach "Eco". Press
3. Press the
4. Now you can carry out the programming in steps of 30 min by pressing
–
and . In order to leave the programming mode, wait a short time and the
menu will be left automatically.
5. After a short period the setting will be adapted and saved.
6.4

Turn off PID display feature

There is the option to turn the PID display off: Press the
on the display, which indicates that the machine is still turned on. The display will be turned on again by
+
pressing the button once more.
Bedienungsanleitung / Instruction manual Profitec PRO 600 - I
+
to enter the CLN menu.
+
to enter the Eco menu.
+
button until the display turns off. A dot will appear
26
+
ENGLISH