Switching On / Off The Steamboiler - Profitec Pro 600 Bedienungsanleitung

5. Please wait a short while after having set the nominal temperature
value; 't1' will be displayed
–
in order to display 't2' (steam boiler). If you would like to
6. Press
change just 't2' and leave 't1' unchanged, press
progress directly to 't2' and skip 't1'. Continue with step 7.
+
in order to progress to the submenu of 't2' and to change the
7. Press
temperature value. The nominal temperature value is displayed.
8. Quickly press
–
+
the nominal temperature value.
9. Please wait a short while after having set the nominal temperature
value; The menu will be left automatically. The newly programmed
nominal temperatures are now saved. Both heaters are now activated
successively.
6.3.2

Switching ON / OFF the Steamboiler

1. Turn on the machine.
–
+
at the same time and "t1" will appear on the display.
2. Press and
–
button until you reach "o2".
3. Press the
+
4. Press to enter the o2 menu.
5. Now you can set the Boiler on or off by pressing
6. In order to leave the programming mode, wait a short time and the
menu will be left automatically.
Bedienungsanleitung / Instruction manual Profitec PRO 600 - I
to decrease
to increase
–
after step 2 in order to
+.
25
ENGLISH