Connection; Front Panel Connections; Front Panel Leds - Knauer Smartline 5000 Serie Handbuch

14

Connection

Front Panel Connections

Figure 5
Figure 6

Front Panel LEDs

Depending upon the model, there are 2 or 4 degassing channels. Pairs of
female ¼-28 connectors are located on the front of the Vacuum Degasser
module on the Smartline Manager 5000. These are the input and output
ports for running up to 4 solvent lines through the Vacuum Degasser.
Each channel has an input port and an output port on the same level. In
Figure 5 and Figure 6 the connection of both degasser units with LPG
unit is shown.
Plugs are provided to seal the ports of unused channels.
Degasser
Flow
Degasser Tubing Connection, analytical version
Degasser
Degasser Tubing Connection, semiprep. Version
The green power LED in the upper left part of the Manager front door
indicates the general state of readiness. Two additional LEDs are located
on the front door of the Manager unit to show the system status of the
degasser unit.
POWER (Green)
Indicates when power is applied to the Vacuum Degasser unit (realised
by the Smartline Pump 1000).
Vacuum Degasser Unit
LPG Unit
A
B
C
D
LPG Unit
A
B