Product Description - CO/Tech 36-6541 Bedienungsanleitung

• Always keep the fan heater out of reach of children and invalids, do not let them
use the fan heater without supervision.
• The fan heater should only be connected to a 230 V, 50 Hz power supply.
• The fan heater must not be placed directly below a wall socket.
• The fan heater must not be placed on or next to a stove, cooker hob or heat source.
• Do not leave the fan heater switched on unattended overnight.
• Before connecting the fan heater to the mains, make sure that it is turned off and
that your hands are completely dry.
• Do not use extension leads for this product. Connect it directly to a mains outlet.
• The fan heater is intended for indoor use only.
• The fan heater must not be taken apart or modified. The casing houses non-
insulated components. Contact with these can lead to fire or electric shock.
• The mains lead must be changed if damaged. This is to prevent the risk of electric
shock or fire and should only be carried out by the manufacturer, qualified service
facility or qualified technician.
• Make sure to route the mains lead behind the fan heater so that it is not heated by
the hot air from the fan heater.
• Never use water or a wet cloth to clean the housing of the fan heater, doing so will
pose a risk of electric shock or short-circuiting.
• The fan heater must not be used in humid environments.
• Always let the fan heater cool down before moving it.
• The fan heater may not be controlled by an external timer or any type of remote control.
Warning: Do not cover. To avoid overheating, never cover the appliance.

Product description

• Two independent PTC ceramic heating elements
• Touch-button controls
• Remote control
• Timer (1–12 hours)
• Thermostat (15–35 °C)
• Quiet motor
• Dual thermal cut-out overheating protection
• Tip-over switch
• Removable dust filter for easy cleaning
4