Product Description - CO/Tech FH805 Bedienungsanleitung

Product description

1. Air outlet
2. Air inlet
3. Control panel
4. Foldout legs
Control panel
5. [ Ι ] Cool Air
6. Thermostat knob
7. [ ΙΙ ] Warm Air 900 W
8. [ ΙΙΙ ] Warm Air 1800 W
9. Indicator light
10. [ l ] On
11. [ 0 ] Off: When the button is pressed in, the indicator light
(9) flashes and the fan heater enters Cool Air mode for 30
seconds (if one of the warm air modes is selected) in order
to cool down the fan heater (Cool Down mode). This reduces
the risk of the someone burning themselves on the fan heater.
Instructions for use
Placement
• Place the fan heater on a hard and level surface.
• Never place the fan heater on soft surfaces such as beds, blankets or thick rugs, etc.
• Do not place the fan heater in a bathroom, laundry room, or close to the bath or shower.
• Do not use the fan heater in damp or dusty environments.
• Place the fan heater some distance away from furniture, curtains and other flammable objects.
Make sure that fan heater is at least 90 cm from combustible materials.
On
1. Plug the mains lead into a wall socket.
2. Turn the power switch on which is located on the back of the fan heater.
3. Press [ l ] (10) to switch the fan heater on. The indicator light (9) will
come on.
4. Press [ Ι ], [ ΙΙ ] or [ ΙΙΙ ].
The thermostat knob must be turned in order to activate the Warm Air modes.
2
1
5
4
3
5
9 10 11
6
7
8