Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remote control
1. Remove any insulation film from the battery.
2. Insert the battery (CR2032) into the remote control as shown.
3. Aim the remote control at the display panel on the fan heater.
Placement
•
Place the fan heater on a hard and level surface.
•
Never place the fan heater on soft surfaces such as beds, blankets and thick rugs.
•
Do not place the fan heater in a bathroom, laundry room, or close to the bath or shower.
•
Do not use the fan heater in damp or dusty environments.
•
Place the fan heater some distance from furniture, curtains or other flammable
objects. Make sure that the fan heater is at least 90 cm from combustible materials.
Operating instructions
Display
Illuminates when both the main power switch (7) and power
button (1) are set to ON.
Illuminates when the heating elements are set to low power.
Illuminates when the heating elements are set to high power.
Shows current room temperature.
Shows timer setting in hours.
Illuminates in oscillating (swing) mode.
7
Werbung
Inhaltsverzeichnis
Fehlerbehebung
