CO/Tech 36-6541 Bedienungsanleitung Seite 6

Touch buttons on fan heater and remote control
A B
A. [ HEATER (1) ], upper heating element.
Touch repeatedly to select power setting:
max – min – off.
B. [ HEATER (2) ], lower heating element.
Touch repeatedly to select power setting:
max – min – off.
C. [ + ] Increase temperature setting/hours for
the timer depending on mode: temp or timer.
D. [ – ] Decrease temperature setting/hours for
the timer depending on mode: temp or timer.
E. [ TEMP./TIMER ] Press repeatedly to select
temperature setting (°C) or timer setting (H).
F. [ SWING ] Press to start the oscillating motion.
Assembly
1. Take the fan heater, base and remote control out of the box and packaging material.
2. Lay the fan heater on a table so that the bottom sticks out over the edge.
3. Remove the locking ring (9) by turning it anticlockwise.
4. Fit the base onto the bottom of the fan heater and lock it in place by turning
the locking ring clockwise.
5. Place the fan heater on a hard, flat and level surface.
C D E F
A
B
C
D
6
F
E