Connection; Connecting The Optical Sensor To A Cable; Digital Connection To A Transmitter - Mettler Toledo InPro 6000 Bedienungsanleitung

16
4.2

Connection

4.2.1 Connecting the optical sensor to a cable

The sensor is connected to the transmitter via a
5 pin data cable for InPro 6870 i, 6960 i and 6970 i
or a VP6 / VP8 cable for InPro 6860 i. The data cable
ensures a secure connection between the transmitter
and the sensor under harsh industrial conditions. The
robust watertight IP 67 connector housing guarantees
maximum process safety.
To connect the data cable to the sensor align the slit
of the connector with the pin in the plug. Then tightly
screw the plug to fasten the two parts.

4.2.2 Digital connection to a transmitter

h
Note: Cable assignment can be found in the METTLER
TOLEDO cable instruction manual.
h
Note: For connecting the cable to the terminals of the
transmitter, please refer also to the instructions given
in the METTLER TOLEDO transmitter manual.
The cables are available from METTLER TOLEDO in
various lengths:
Connect the data cable to the tranmitter as described
in the tables below.
RS485 cable for
InPro 6870 i / InPro 6960 i / InPro 6870 i
Color
brown 24 VDC+
black 24 VDC– 2
gray
yellow shield
blue
white
InPro 6000 optical O
52 206 256
InPro 6000 Series Optical O
M400
Function TB4
1
shield 6
6
RS485– 7
RS485+ 8
sensors © 01/ 2016 Mettler-Toledo GmbH
2
Transmitter M400
M800
1/2 channel
TB2
9
10
12
15
13
14
Sensors 12 mm
2
M800 M400
4 channel 2w/FF/PA
TB2 or TB2
TB4
9 n.c
10 n.c.
12 M
15 n.c.
13 N
14 O
Printed in Switzerland