Kingstone 24787181 Aufbau- Und Bedienungsanleitung Seite 20

GB-BAHAG KINGSTONE KAMADO ANLTG 2017 RZ 18.10.17 11:06 Seite 20
ASSEMBLY
2 + 3
1 ATTACHING THE CASTER WHEELS
Attach the four pre-threaded caster wheels (2 & 3) to each
of the four brackets (1) by hand-tightening them into the hole.
1
4
2 ASSEMBLING THE CART
1
To assemble the cart, insert the two crosspieces (4) into two
of the four brackets (1) from both the top and bottom.
3 COMPLETING THE CART
Continue to insert the crosspieces (4) into the other two brackets (1).
Secure the brackets (1) to the crosspieces (4) by using the 16x screws (A).
Please note the position shown in the diagram.
4 LIFTING THE CERAMIC BODY ONTO THE CART
Make sure the cart is secure, and all of the bolts are tight before placing the
ceramic body (8) into it. Press down on the caster levers (2) to lock the caster
wheels to ensure the ceramic charcoal barbecue cannot move.
To place the ceramic body (8) on the cart, first remove all of the items that are
8
inside of the grill to make lifting easier. Place one of your hands in the bottom
vent of the ceramic body and the other under the grill.
CAUTION:
Use a minimum of two people when lifting the ceramic body onto the cart. Lifting
by the hinge or the side tables could result in injury and damage to the product.
Place the ceramic charcoal barbecue on the cart with the bottom vent facing to
the front of the cart allowing the vent to open and close without any interruption.
20