Safety Notes - Renkforce MINIPAR 18 x 1 W Bedienungsanleitung

5. Safety Notes

Read the operating instructions attentively and particularly observe the safety
notes. If the safety notes and the information in these operating instructions
regarding proper handling are not observed, we assume no liability for any
resulting injury/property damage. In such cases, the warranty/guarantee will
also lapse.
• For safety reasons, any unauthorized conversions and/or modifications to the
product are not permitted.
• The device is designed according to protection class I. The only permissible volt-
age source is a proper grounded mains socket (100-240 V/AC, 50-60 Hz) of the
public mains.
• The mains socket must be close to the device and easily accessible.
• Anyone operating, installing, setting up, commissioning or servicing this effect
spotlight must be trained and qualified properly and observe these operating in-
structions.
• Never look straight into the light source during operation. The bright light flashes
may temporarily impair your eyesight. Apart from this, epileptic fits may be trig-
gered under certain circumstances in persons sensitive to such lights. This par-
ticularly applies to epileptics.
• LED radiation may be dangerous if the LED beam or a reflection enters the un-
protected eye. Therefore, familiarise yourself with the statutory regulations and
measures of precaution for the operation of this kind of LED device before using
the device.
• Never touch the mains plug with wet or damp hands. There is a risk of potentially
fatal electric shock!
• Do not touch the mains cable if it is damaged. First, power down the respective
mains socket on all poles (e.g. via the respective circuit breaker and FI switch) and
then carefully pull the mains plug from the mains socket. Never use the product if
the mains cable is damaged.
• When mounting the product, make sure that the power cord is neither jammed nor
damaged by sharp edges.
29