Intended Use - Renkforce MINIPAR 18 x 1 W Bedienungsanleitung

3. Intended Use

The PAR spotlight is used to generate light effects in light show equipment, party rooms, etc. and
is controlled by the built-in controller or an external DMX controller.
This product is only approved for connection to 100-240 V/AC, 50-60 Hz alternating current and
only for use with an earthed mains socket.
The DMX connections must only be connected to suitable DMX controllers or other DMX de-
vices.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For reasons of safety and approval, the product must not be converted and/or changed by you.
Using the product for any other purposes than those described above may damage the product.
Improper use also may cause dangers such as short circuit, fire, electric shock, etc. Read the
operating instructions precisely and keep them. Only pass the product on to any third parties
together with the operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
27