Installation - Renkforce MINIPAR 18 x 1 W Bedienungsanleitung

8. Installation

Assembly and installation of the device must be carried out by a specialist familiar with
the hazards and the relevant regulations. Maintenance, operation and commissioning
of this device must only be carried out by qualified persons.
When choosing a location for your device, make sure to avoid impact, vibration, dust,
hot and cold temperatures and dampness. Furthermore, no powerful transformers or
motors must be used close to the device.
The effect light must only be operated at a maximum ambient temperature of 40 °C.
Never cover the device. Make sure when mounting with other equipment that there is
sufficient ventilation. Maintain a sufficient distance to other devices and walls. Never
place the effect light in direct proximity of heat sources. Do not point any strong spot-
lights or light sources towards the device. This may cause overheating (danger of
fire!).
Do not drill or screw additional screws into the casing in order to fasten the device.
This may expose dangerous voltage to touch.
The device must be mounted out of normal reach.
Illuminated objects must be at least 0.5 m away from the device's light emission
source. Easily flammable materials such as decorative fabrics must also have a dis-
tance of at least 0.5 m to the device. Otherwise, such objects may catch fire!
When mounting the product, make sure that the power cord is neither jammed nor
damaged by sharp edges.
During installation or service work, the area below the place of installation must be
cordoned off.
The setup/installation surface or fixture must be designed to carry ten times the load
capacity for at least one hour without any permanent damaging deformation.
It is also essential that the device is secured by means of a second safety restraint
that is independent of the actual mounting supports when installing it in an elevated
position. No part of the installation must fall down if the main suspension system fails.
Observe all relevant regulations of your country when mounting/installing the device.
33