Manual Or Automatic Channel Selection - Conrad 75 16 16 Bedienungsanleitung

Press the ZOOM
played.

8.5 Manual or automatic channel selection

You can select the individual camera channels by shortly pressing the
camera channel selection button
You can also set a time for automatic switching to the next camera signal. Proceed
as follows to use this function:
• Press the MENU button
• Press the UP
• Use the LEFT
(in seconds) or select "OFF" to deactivate automatic switching.
• Press the MENU button
Use menu items "Camera1 ON/OFF", "Camera2 ON/OFF",
"Camera3 ON/OFF" and "Camera4 ON/OFF" to activate
(=Option ON) or deactivate (=Option OFF) camera channels. If a
camera channel is deactivated, it will neither be displayed dur-
ing automatic switching nor when a channel is manually select-
ed by pressing the
58
button (20) again to exit zoom mode. "ZOOM" is no longer dis-
(19).
(16). The settings menu opens up.
(15) or DOWN
(17) or RIGHT
(16) to accept the settings.
(18) button to select menu item "Scan Time".
(21) button to select the desired time interval
button (19).