Conrad 75 16 16 Bedienungsanleitung Seite 71

4) Click on the camera box (under the respective time segment) until the desired
camera channel is selected. The system will then switch to the selected camera
at the respective time (only one camera can be recorded at a time). This means
that one camera channel, i.e. one camera, must be assigned to every time seg-
ment.
5) Define whether to record a video clip or a picture. Set the desired resolution.
The selected resolution is also applied to the camera window.
6) Click on the SAVE button to save the settings.
You can specify where to save the recordings by clicking on the "Security Setup"
icon and then selecting "Storage" in the settings sub-menu (right).
70