Signal Strength; Zoom Mode (Qvga) - Conrad 75 16 16 Bedienungsanleitung

8.3 Signal strength

An aerial symbol is displayed in the top left-hand corner of the screen. Four vertical
bars are displayed next to the aerial symbol. They indicate the signal strength (max.
4 bars = best reception quality).
Signal
Optimal
Good
Normal
Poor
No signal
* VGA image frequency is used in normal display mode.
** QVGA image frequency is used in zoom mode (see chapter "6.4 Zoom mode").

8.4 Zoom mode (QVGA)

Press the ZOOM button
mode is active, "ZOOM" is displayed to indicate it (see chapter "8.1 Display indica-
tors").
If you are not in zoom mode, you are in normal display mode (VGA).
In zoom mode, you can move the camera image up, down, left, or right. Hold down
buttons UP (15), LEFT
Number of Data rate in
displayed Kbps
bars
4 1062 ~ 1280
3 725 ~ 1062
2 543 ~ 725
1 250 ~ 543
0 0 ~ 250
(20) to enter or exit zoom mode (QVGA). When zoom
(17), DOWN
VGA *
Image
frequency
(frames per
second)
5 ~ 10
3 ~ 5
2 ~ 4
0 ~ 1
0
(18) or RIGHT
QVGA **
Image
frequency
(frames per
second)
15 ~ 30
12 ~ 20
8 ~ 15
0 ~ 4
0
(21).
57