Activating The Automatic Channel Switching; Activating And/Or Deactivating The Transmission Channel; Explanation Of "Channel Mode Switch" Labelling (4) - Conrad 75 17 85 Bedienungsanleitung

7.3.1 Activating the Automatic Channel
Switching
Using the unlabelled switch (see Fig. A, the switch is the furthest to the right) you can acti-
vate or deactivate the automatic channel switching.
Move the switch to the position marked with an M in order to deactivate the automatic
channel switching. Move the switch to the position marked with an L in order to activate
the automatic channel switching.
7.3.2 Activating and/or Deactivating the
Transmission Channel
The individual transmission channels can be activated or deactivated using the "Channel
Mode Switch" (4).
If you wish to activate a transmission channel, move the corresponding switch into the
"ON" position. If you wish to deactivate a transmission channel, move the corresponding
switch into the "OFF" position.
7.3.3 Explanation of
"Channel Mode Switch" Labelling (4)
Labelling 1 to 4
Label 1 = transmission channel 1, 2 = transmission channel 2, 3 = transmission channel
3, 4 = transmission channel 4
Label OFF/ON
OFF = deactivate transmission channel, ON = activate transmission channel
Label M/L
This labelling applies only to the switch positioned furthest to the right.
30