Conrad 75 16 16 Bedienungsanleitung Seite 50

• In commercial institutions, the accident prevention regula-
tions of the Employer's Liability Insurance Association for
Electrical Systems and Operating Materials are to be
observed.
• The provided receiver and the wall power supplies of this
system are intended for dry indoor use only.
• The camera is suited for outdoor use (IP44).
• The wall power supplies are protection class II products.
• It is only permissible to use the provided wall power supplies
to power the camera and the receiver.
• Ensure that all the electrical connections and connection
cables between devices and any extension cables comply
with regulations and the operating instructions.
• Electronic devices are no toys and should be kept out of the
reach of children!
• The camera features infrared LEDs for night vision. Please
note that the image recordings are black and white when the
IR LEDs are active during darkness.
• Live components may be exposed if covers are opened or
parts are removed (unless these parts are intended to be
removed without tools). Terminals may also be live. If the
device needs to be opened for calibration, servicing, repair or
replacement of parts or components, it must be disconnected
from all voltage sources first. Any necessary servicing or
repair on the open device must be carried out by a specialist
who is familiar with the risks involved and the relevant regu-
lations.
• Capacitors in the device may still be charged even after it has
been disconnected from all power sources.
• The wall power supply plug/power line must not be plugged in
or unplugged with wet hands.
• Never pull on the cable of the wall power supply. Always
unplug it by pulling out the housing.
• When installing the device, make sure the connection cables
are not squeezed or damaged by sharp objects.
49