Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To extend the audio and video signal, only use suitably shielded
RCA cables. The use of other cables might cause disturbances.
Keep the length of the cables as short as possible.
7. Operation
• Plug the two wall power supplies of the wireless system into mains sockets.
• Switch on your display device and select the desired channel.
8. Functions
8.1 Display indicators
A) Signal strength indicator
Shows the signal strength (the more bars are displayed, the better is the recep-
tion (also see chapter "6.3. Signal strength")).
B) Camera channel indicator
The number represents the currently displayed camera channel.
C) Zoom indicator
The receiver has a digital zoom function. If the zoom is used, "ZOOM" is dis-
played as illustrated above.
D) Status indicator
If "NO SIGNAL" is displayed, the receiver does not receive a camera signal. In
this case, run the pairing function (see next chapter) or select the correct cam-
era channel that the camera has been assigned to.
55
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
