A)
This symbol appears if the camera is in photo mode (slider "Video/Photo"
(9) set to the photo position).
This symbol appears if the camera is in video mode (slider "Video/Photo"
(9) set to the video position).
This symbol is shown during a recording
B) Current time and date
C) Recording time
D) Charging state of the internal battery
E) Time
11. Manual Image or Video Capture
For manual image or video capture, ensure that automatic motion detection is
deactivated.
a) Image Capture
Put the "Video/photo" slider (9) into the right position (= photo, indicated by a
camera symbol). Hold down the "Multi function button" (6) for 5 seconds to switch on
the camera. The green "Video/photo" status LED (8) lights up.
Press the "Multi function button" (6) once to record a photo. The green "Video/
photo" status LED (8) flashes once.
To record a photo, you may also use the "REC"
b) Video Capture
Put the "Video/photo" slider (9) into the left position (= video, indicated by a video
camera symbol). Hold down the "Multi function button" (6) for 5 seconds to switch on
the camera. The blue "Video/photo" status LED (8) lights up.
Press the "Multi function button" (6) once to record a video. The blue "Video/photo"
status LED (8) flashes while recording.
34
button once.