Responsible Disposal - Cocraft HB 10-L Bedienungsanleitung

The saw blade does
not align centrally on
the blade pulleys.
The product vibrates
an abnormal amount.

Responsible disposal

This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can
be disposed of in a responsible manner. When recycling your product, take it to
your local collection facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
Specifications
Voltage
Power
No-load idle speed
Included blade
Blade width
Blade speed
Suitable blade
Table size
Table size with
table extension
Noise level
Weight
The blade pulley wheels are not in line,
bad bearings.
The blade pulley wheels are not in line,
incorrectly set.
Incorrect blade.
The product is in an unstable position. Place the product on a level
The motor is loose. The drive belt is
too loose.
Damaged drive belt.
230−240 V AC, 50 Hz
370 W
730 m/min
1712 mm, 6 TPI (teeth per inch)
3.175–12.7 mm
730 m/min
1700–1720 mm
340 × 340 mm
340 × 485 mm
LpA = 78.4 dB(A), K = 3dB(A)
LwA = 91.1 dB(A), K = 3dB(A)
36 kg
18
Contact our Customer Services.
Adjust the alignment using
the knob on the back of
the saw.
Change blade.
floor.
Tighten the motor attachment.
Tension the drive belt.
Change drive belt.