Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Saw blade safety
•
Use only blades recommended by the manufacturer/supplier.
•
Do not use a damaged or deformed saw blade. Doing so could result in considerable danger
to the user or damage to the product.
•
The direction marked on the saw blade should correspond to the direction of the pulley's rotation.
•
The teeth of the blade should be pointing downwards when the blade is viewed from the side.
•
Release the blade tension when the saw is not used. Always wear safety gloves and safety
glasses when fitting or removing a saw blade.
•
Always roll up the saw blade in an open area away from other people. Store the blade coiled
up and protected with fastening wire.
•
Always keep your fingers away from moving saw blades.
The most frequent risks when band sawing are
•
Dangers associated with the moving saw blade.
•
Off-cuts from the workpiece which can be ejected towards the user.
•
Workpiece kickback.
Despite the fact that the band saw has been fitted with
all the necessary safety devices and conforms to relevant
safety standards, the following risks still exist
•
Hearing damage caused by high noise levels.
•
The risk of an accident in the unprotected area around the saw blade.
•
The risk of injury when changing the saw blade.
•
The risk of flying off-cuts or wood chips.
•
Risk of crush injuries.
•
The risk of hazardous situations caused by kickback.
•
The risk of inhalation of harmful dust, especially oak and beech sawdust.
Product safety symbols and their meaning
Read the instruction manual carefully before use.
Always use ear protection, eye protection and respiratory protection
to prevent inhalation of harmful dust.
Warning! Disconnect the machine from the electric outlet before opening the door for
service and maintenance. The door may not be open while the machine is in use.
6
Werbung
Inhaltsverzeichnis
