User Guide - Baume And Mercier Clifton Bedienungsanleitung

B. USER GUIDE
This guide explains all the functions available for different
Baume & Mercier watch models.
To adjust your watch, please identify its icon , and refer
XX
to the diagram located on the inside cover of this guide, then
follow the directions corresponding to your model.
SETTING THE TIME WITHOUT A CALENDAR
Adjustment by crown 1 3
1. P u l l t he c row n to Po sit ion 2 . I f you r wat ch h a s
a seconds hand (C), it will stop moving.
2. Turn the crown either clockwise or counter-clockwise
until the watch hands (A, B) are positioned at the desired
time.
3. Reset the crown Position 1.
Adjustment by rear corrector button 2
To manipulate the corrector button, use the small tool
provided in the watch packaging.
1. Press the corrector button (C0) continuously to advance
the hands (A,B).
2. Stop pressing a few minutes before the desired time.
3. Press the corrector button several consecutive times to
advance the minutes hand step by step to the desired time.
14 |
SETTING THE TIME WITH A CALENDAR
4 5 8 13 30
1. Pull the crown to Position 3. If your watch has a seconds
hand (C), it will stop moving.
2. Turn the crown either clockwise or counterclockwise,
depending on the model, until the hands (A, B) are
positioned at the desired time.
Note: When the hands (A) pass the 12, if the date changes,
it means it is midnight, and if the date does not change, it
means it is noon.
3. When the start of the set time is announced (reference
clock, radio, etc.), reset the crown Position 1.
RAPID DATE CHANGE
4 5 8 13
Warning: To avoid damaging the movement, it is vital not
make any rapid date changes during the following time
window, since this is when the movement pinions are gearing
up for the automatic date change.
Between 11 p.m. and midnight 4 5
§
Between 9.30 p.m. and midnight 8
§
1. Pull the crown in Position 2.
2. Turn the crown to advance the date (E) chronologically,
until the desired date appears.
3. Reset the crown Position 1.
For months with less than 31 days, the date must be changed
manually at the end of the month.
SETTING THE DATE USING RAPID HOUR
CORRECTION
30
1. Pull the crown in Position 2.
2. Turn it either clockwise or counter-clockwise to move
the hour hand (A) forward or backward, until the desired
date is displayed (E).
3. Reset the crown Position 1.
For months with less than 31 days, the date must be changed
manually at the end of the month.
Note : When the hands (A) pass the 12, if the date changes,
it means it is midnight, and if the date does not change, it
means it is noon.
DUAL-TIME FUNCTION ADJUSTMENT USING
THE CORRECTOR
13
NB: You must always:
- use the small tool provided in the case to manipulate the
corrector button. Press sufficiently firmly until the "click",
- activate the adjustment mode before adjusting the time
zone.
1. Activate the dual-time adjustment mode by pressing the
corrector button (C5) for at least two seconds until the minutes
hand of the second time zone (D) moves one minute forwards.
2. Set the hours and minutes hands of the second time zone
(D) to the required time by proceeding as follows:
- a brief (less than one-second) press on the corrector (C5)
moves the time forwards in one-minute increments.
- a medium (from one to two-second) press on the corrector
(C5) move the time forwards in one-hour increments.
- a prolonged (more than two-second) press on the
corrector (C5) moves the time zone forwards continuously
until the corrector is released.
Note : The adjustment mode is deactivated if the corrector is
not touched for a full 10 seconds.
SETTING THE MOON PHASE
8
The setting of the moon phases on this watch does not have
rapid correction, and thus is accomplished using the time-
setting.
1. Pull the crown to Position 3.
2. Turn the crown to advance the hands (A, B) clockwise.
This also has the effect of rotating the moon-phase disc
(I) by jumps (one jump per day).
3. Continue to turn the crown to rotate the moon-phase disc
of (I) by jumps until the full moon appears in the center of
the aperture.
4. Continue turning the crown in order to bring about as
many jumps as there are days passed since the last full
moon (consult a calendar).
5. Reset the crown Position 1.
To know the dates of the full moon and set your watch,
please visit our website www.baume-et-mercier.com and
consult the page corresponding to your model.
| 15