Baume And Mercier Clifton Bedienungsanleitung Seite 12

Crown in Position 1: turn crown clockwise. The watch is
fully wound when the crown can no longer be turned.
The power reserve of a mechanical watch varies, depending
on the model, between approximately 40 and 90 hours
We recommend you wind it once a day if it has a power
reserve less than 48 hours.
Self-winding mechanical watch
A watch equipped with an automatic winding mechanism
automatically winds itself throughout the day as you move
your wrist.
Because of this, the watchband must be correctly fitted to
the wearer's wrist. If the watchband is too loose, the watch
may not wind itself correctly. For optimal winding, wear your
watch daily.
If you have not worn your watch for more than 40 hours,
you must wind it manually by turning the crown in Position
1, clockwise, between 20 and 30 turns.
After wearing your watch for several hours, depending on
your activity level, the watch will be perfectly wound.
Once completely wound, your watch has a power reserve of :
Approx. 40 hours 3 5 7 9 10 11 12 14 15 16 17 18
§
19 22 29
Approx. 48 hours 21 23 24 25 26 27 28
§
Approx. 65 hours 20
§
Approx. 120 hours 5
§
6 |
POWER RESERVE
10 11 14 15
For models with a power reserve indicator, the hand (L)
indicates, on a scale which may vary per model, the amount
5 6 . of time remaining until the watch must be wound again.
When the watch is entirely wound, the indicator sits at its
maximum position.
SETTING THE TIME WITHOUT A CALENDAR
FUNCTION
3 6 10
1. Pull the crown in Position 2.
2. Turn it either clockwise or counter-clockwise until the
watch hands (A, B) are positioned at the desired time.
3. Reset the crown Position 1.
SETTING THE TIME WITH A CALENDAR
FUNCTION
5 7 9 11 12 14 20 21 22 23 24 25 26
28 29
1. Pull the crown to the maximum position (Position 2 or
3 depending on the model). If your watch comes with a
seconds hand (C) it will stop moving.
2. Turn the crown either clockwise or counter-clockwise,
depending on the model, until the hands are positioned
at the desired time.
Note : When the hands pass the numeral 12, if the date
changes, it means it is midnight and if the date does not
change it means it is noon.
3. When the start of the set time is announced (reference
clock, radio, etc.), reset the crown to Position 1.
RAPID DATE CHANGE
Warning: In order to prevent damage to the movement, it
is extremely important that you do not use the rapid date
change function between 8 p.m. and 2 a.m.; this is when
the movement pinions are working to automatically change
the date.
Date change using the crown
5 7 9 11 12 14 20 21 22 23 24 25 26 29
1. Pull the crown in Position 2.
2. Turn the crown either clockwise or counterclockwise,
depending on the model, until the desired date (E)
appears.
3. Reset the crown Position 1.
For months with less than 31 days, the date must be changed
manually at the end of the month.
Rapid date change with corrector
28
If your watch comes equipped with a corrector (C1) for
setting the date, press the corrector button (C1) several times
in succession, so as to advance the date (E) to the desired date.
To do this, use the small tool provided in the watch packaging.
For months with less than 31 days, the date must be changed
manually at the end of the month.
RAPID DAY CHANGE
26
Warning: In order to prevent damage to the movement, it
is extremely important that you do not use the rapid day
change function between 8 pm and 2 am; this is when the
movement pinions are working to automatically change
the day.
1. Pull the crown to Position 2.
2. Turn the crown clockwise until the desired day (K) appears.
3. Reset the crown Position 1.
DUAL TIME
Adjustment by crown
9 24
1. Pull the crown in Position 2.
2. Turn the crown clockwise to set the second time zone
hand (D) at the desired time.
Warning: For adjustment by corrector, do not adjust
immediately after re-setting the time on your watch in a
counter-clockwise direction. This may damage the movement.
In this specific situation, wait approximately 30 minutes
before setting the second time zone.
Adjustment by corrector
14
If your watch has a corrector, press the corrector button (C1)
several times to move the second time zone hand (D) forward
and position it to the time of the desired zone. To do this, use
the small tool provided in the watch packaging.
RETROGRADE DATE
15
To set you r watch, please perform these steps in the
following order:
Setting the day of the week
1. Pull the crown to Position 3
2. Turn the crown in either direction until the day hand (K)
indicates the day immediately preceding the desired day.
3. Position the hands (A, B) at 2 a.m.
| 7