Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In order for a long period of trouble-free service of the instrument, please pay special attention to the
following precautions:
1. Protect the instrument from excessive impact during transportation and installation.
2. Be sure to verify whether the line voltage setting matches the line voltage used.
3. Use a fuse with correct ratings only.
4. Do not apply excessive AC or DC voltage to the signal output connector beyond the maximum
voltage allowed.
5. Use the instrument within operating temperature range, which is from 15° C to 35° C.
6. For an accurate measurement, allow approximately 30 minutes of instrument warm-up time.
7. Avoid operating the instrument under the following conditions; direct sun light, rapid
temperature variation, high humidity, or strong magnetic field.
8. Do not alter or change the parts or their locations inside the instrument.
The following symbols on instrument and in the documentation indicate precautions which must be
taken to maintain safe operation of the instrument.
Warning
:
A warning calls attention to a procedure, practice or the like which. Correctly performed or adhered
to, could result in injury or loss of life.
Caution
:
A Caution calls attention to a procedure, practice or the like which. If not correctly performed or
adhered to, could result in damage to or the destruction of part or all of the equipment.
: Earth Ground to chassis
: Protective Conductor Terminal
: Frame or chassis Terminal
: Caution, risk of danger
: Out / In position
Read First
Safety Symbols
-33-
Werbung
