PeakTech 1100 Bedienungsanleitung Seite 57

C. The argument for ST and RC commands is limited to a number between 0 and 99. It requires
no unit.
D. The last input for a parameter command format is made of EOS terminator,
LF
CR
CR+LF
EOI
E. Each completed command is separated by semicolon (;).
4.3.4.2. Enumerated Commands
These commands are used to change the system state.
Their general format is as follows:
<header> <alphabetic or ASCII symbol argument> <terminator>
A. The arguments related to the enumerated commands are listed in Table 4-4.
B. The last words in an enumerated command is EOS terminator.
LF
CR
CR+LF
EOI
Table 4-4. Enumerated Command listings
HEADER ARGUMENT
AM ON
AM OFF
FM ON
FM OFF
PI ON
PI OFF
MS ON
MS OFF
DESCRIPTION
AM ON
AM OFF
FM ON
FM OFF
Pilot ON
Pilot OFF
Stereo Modulation
ON
Stereo Modulation
OFF
-56-