Webasto Air Top Evo 40 Einbauanweisung Seite 94

Air Top Evo 40 / Air Top Evo 55
Pos. Description
A1 Heater
A2 Control unit
B2 Room temperature sensor
B3 Blow out temperature sensor
B4 Room temperature sensor
B5 Exhaust gas temperature sensor
E Glow plug
F1 15 A (24 V)
or 20 A (12 V) fuse
F2 4 A fuse
F3 1 A fuse
F4 4 A fuse
F5 Fuse
H1 Green LED (in Pos. S1)
H2 Red LED (in Pos. P)
H3 Display (in Pos. P)
H4 Lamp / LED
(in Pos. P and S)
H5 Lamp / LED
K Relay with free-wheeling diode
M1 Motor
M3 Motor
P Combination timer 1531
Remarks
Air Top Evo 40 / Air Top Evo 55
Control unit 1580
internal
Overheating protection
external
Overheating protection / flame detector
Blade-type fuse SAE J 1284
Blade-type fuse SAE J 1284,
not included with wiring harness
Blade-type fuse SAE J 1284
Blade-type fuse SAE J 1284,
not included with wiring harness
Select the value in [A] according to the wire
cross-section
Operation indicator
Lights for immediate heating button, opera-
tion display
Heating symbol and operation display
Display and button lighting
Pumping device switch-on indicator
max. 500 mA
for vehicle fan
max. 500 mA
Combustion-air and hot air rotor
Vehicle fan
Digital timer and temperature selector
Electrical system
Pos. Description
S Control element for Air Top Evo
MultiControl (MC04)
S1 Control element rotary switch
S2 Switch
S3 Switch
S4 Push button
S5 Switch
S6 Switch, one-pin or two-pin
S7 Battery isolator switch
V1/V2 Blocking diode
X1-X8 Plug connector
X9 (a) Plug connector
X9 (b) Plug connector
X9 (c) Plug connector
X1-X11 Plug connector
X13 Plug connector
X14 Plug connector
X15 Plug connector
X16 Plug connector
X17 Plug connector
Y1 Fuel pump
Y2 solenoid valve/pump
Remarks
"on" switch, selector switch for additional
functions and temperature selector
"On" switch and temperature selector
Ventilation
CO setting
2
external immediate heating button
Pump devices / auxiliary drive
Isolator switch
electronically controlled isolator switch
max. 500 mA
min. 500 mA
at Pos. A2
at Pos. S or S1
at Pos. S or S2
W-Bus, optional connection for Telestart
(12 V) or Thermo Call
In the heater on control unit
at Pos. Y1
at Pos. P
at Pos. S3
Wiring harness connection of DP 42
Wiring harness connection of DP 42
DP 42
Pumping devices / auxiliary drive
max. 500 mA
89