Webasto Air Top Evo 40 Einbauanweisung Seite 85

Electrical system
9.4.3. Installation of the Air Top Evo MultiControl control element
(MC04)
NOTE:
The control element should be installed in a suitable

location (on a flat surface) in the area visible to the driver.
The control element is only intended for installation in the

passenger compartment.
When connecting the control element to the wiring

harness, the instructions on the stickers and the colour
coding must be observed.
 Use the Air Top Evo MultiControl (MC04) control element drilling template
for the cut-out and the drill holes (see Chapter 14, "Drilling templates").
 Connect the control element to the wiring harness using the existing con-
nectors (see Chapter 10, "Wiring diagrams", Fig. 36).
 Install the control element in the cut-out.
Clip on the trim frame.

80
Air Top Evo 40 / Air Top Evo 55
Fig. 31 Installation of the Air Top Evo MultiControl (MC04) control
element