Electrical system
9.4.1.
Installation of rotary selector
The wiring harness is prepared for connection to the rotary selector.
Simply pull on connector housing to unplug the connector.
The connector housing can be locked (self-locking action) by simply pulling
on the wiring harness.
NOTE:
The control element is only intended for installation in the
passenger compartment.
The fibre optic cable must be in contact with the rotary
knob.
Fig. 28
Rotary selector
78
Air Top Evo 40 / Air Top Evo 55
Fig. 29
Installation of the rotary selector (correct and incorrect)