REHM INVERTIG.PRO 240 DC Betriebsanleitung Seite 128

We hereby confirm that the following products
meet all the major protection requirements laid down in the Council Directive
the approximation of the laws of the member states relating to electromagnetic compatibility and
in the Directive
2006/95/EEC
voltage limits
The above products conform to the regulations in this Directive and meet the safety requirements for
equipment used for arc welding in accordance with the following product standards.
EN 60 974-1: 2006-07
Arc welding equipment – Part 1: Welding power sources
EN 60 974-3: 2004-04
Arc welding equipment – Part 3: Arc ignition and stabilisation equipment
EN 60974-10: 2004-01
Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
In accordance with the EU: Directive 2006/42/EG Article 1, Section. 2, the above products come
exclusively under the scope of Directive 2006/95/EWG relating to electrical equipment designed for use
within certain voltage limits.
This declaration is made on behalf of the manufacturer:
REHM GmbH u. Co KG Schweißtechnik
Ottostr. 2
73066 Uhingen, Germany
Uhingen, 08.01.2016
Declaration made by
64
EC Declaration of Conformity
TIG inert gas welding units
INVERTIG.PRO 240 DC, INVERTIG.PRO 240 AC/DC
INVERTIG.POR 280 DC, INVERTIG.PRO 280 AC/DC
INVERTIG.PRO 350 DC, INVERTIG.PRO 350 AC/DC
INVERTIG.PRO 450 DC, INVERTIG.PRO 450 AC/DC
relating to electrical equipment designed for use within certain
R. Stumpp
Managing Director
on
2004/1087EEC