REHM INVERTIG.PRO 240 DC Betriebsanleitung Seite 102

38
4.6 Automation INVERTIG.PRO
4.6.1 Interface INVERTIG.PRO standard
The connection for the automation is made using the standard 7-pin remote
control socket on the rear of the INVERTIG.PRO.
The following signals are available:

Start / Stop (to start the welding procedure)

Current I (to remotely control the welding current)
1

Current flows (to identify whether welding current is flowing)
For more information, please contact your REHM retailer.
Accessories and Options