Delete Data; P) Aligning The Outdoor Sensor To The South; Q) Colour-Changing Display Elements - Eurochron Monalisa 1538488 Bedienungsanleitung

o) Delete data
• It is likely that incorrect wind and rainfall measurement will be taken while the outdoor sensor is being mounted.
• To delete the measured data from the weather station, press and hold the HISTORY button for 10 seconds. The
time will be kept.

p) Aligning the outdoor sensor to the south

You can align the outdoor sensor to the south if its location prevents it from facing north. To ensure that the wind
direction will still be displayed correctly, proceed as follows:
• Install the outdoor sensor so that the arrow on the top points south.
• Press and hold the
• Press the V or buttons so that the bottom part of the compass begins flashing.
• Press the button (wind) to confirm.

q) Colour-changing display elements

• You can adjust the brightness of display elements using the slide switch OFF / LO / HI.
OFF: dark
LO: medium
HI: bright
• Push the LOOP button to activate continuous automatic colour change.
• Repeatedly press the RAINBOW button to select a specific colour. The following colours are available:
White → red → orange → yellow → green → cyan → blue → purple
• Press the OUTDOOR TEMP button to change the colour of the display elements depending on the outdoor
temperature.
48
button (wind) for 8 seconds until the top part of the compass begins flashing.