Pairing; Operation; Radio-Controlled Clock; B) Manually Setting The Time / Select Time Zone - Eurochron Monalisa 1538488 Bedienungsanleitung

14. Pairing

• After the batteries have been inserted and the power adapter is connected, the weather station will search
automatically for the outdoor sensor signal. After the units pair successfully, the measured data from the outdoor
sensor will be displayed on the weather station.
• If you have changed the batteries of the outdoor sensor, you must manually initiate pairing. Proceed as follows:
- Replace batteries.
- Press the SCAN button on the weather station.
- Press the RESET button on the bottom of the outdoor sensor.

15. Operation

a) Radio-controlled clock
• After the power adapter is connected, the weather station will search automatically for the time signal. The icon
flashes while the device searches for the time signal.
• The icon lights up permanently when the signal is received.
• The clock synchronizes daily.
• The signal strength is indicated in different levels.
No signal
• You can enable or disable the automatic radio clock reception by pressing the RCC button for 8 seconds.

b) Manually setting the time / select time zone

• Press and hold the button
• Use the V and buttons to set the time. Press and hold the button to fast forward.
• Press the button (clock) to confirm the setting and to go to the next parameter.
• You can set the parameters in the following order:
Time format → hours → minutes → seconds → year → month → day → time zone (-23 to +23) → language
→ daylight saving time.
42
Weak signal
Activated
(clock) for 2 seconds. The 12 or 24 Hr indicator starts flashing.
Acceptable signal
Deactivated
Excellent signal