B) Connecting The Outputs; C) Connecting The Record Player Ground; D) Connection Of The Voltage Supply - MC Crypt DJ-80 Bedienungsanleitung

Connection

b) Connecting the outputs

MASTER OUTPUT (29)
Connect the MASTER output to a free cinch input of your amplifier (e.g. AUX).
OUTPUT REC (28)
If you wish to record the output signal from the mixing desk using a recording device, connect the recording input of
the device to the REC jacks (28) on the mixing desk.
PHONES headphone jack (8)
Connect headphones with a 6.3 mm jack plug to the headphone jack.

c) Connecting the record player ground

If your record player has its own grounds (usually a thin, black cable with clamp-type socket), connect these to the
GND ground screw terminals (25). This helps to avoid buzzing and interference.

d) Connection of the voltage supply

The mixing desk and all connected devices have to be switched off.
Ensure that all the electrical connections and connection cables between the different devices
and any extension cables comply with the regulations and the operating instructions.
• Connect the mains plug of the mains cable AC INPUT (31) with a 230V~/50Hz mains outlet.
33