Setup - MC Crypt DJ-80 Bedienungsanleitung

Setup

Ensure proper ventilation is provided when setting up the device.
Never place the product on soft surfaces such as, for example, a carpet or a bed, etc.
Apart from this, the air circulation may not be obstructed by objects such as magazines, table
cloths, curtains or similar. This prevents the heat from escaping from the device and can lead
to overheating (fire hazard).
Do not drill any holes or screw any screws into the housing of the mixing desk to fasten the
device. This can damage the device.
Make sure that the surface is secure and the base stable when setting up the device.
There is risk of persons being injured if the mixing desk fell over.
When setting up the device, make sure that the connection cable is not being pinched or
damaged by any sharp edges.
Always lay the cables so that nobody can trip over or become entangled in them. Risk of injury.
When selecting a location for the aerial, make sure it is not exposed to direct, intensive sunlight,
vibration, dust, heat, cold and humidity.
Make sure there are no devices with strong electric or magnetic fields such as transformers,
motors, cordless telephones and radio-controlled devices in the vicinity of the mixing desk as
these can influence it.
Never place the device on valuable or delicate furniture surfaces without providing sufficient protection.
31