Scheppach BASA4 Originalbetriebsanleitung Seite 28

Explanation of the symbols on the product
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace
proper accident prevention measures
Warning! Disregard results in a risk of death or injury, or damage to the tool!
Before commissioning, read and observe the operating manual and safety instructions!
Wear safety goggles!
Wear hearing protection!
If dust builds up, wear respiratory protection!
Attention! Danger of injury! Do not reach into saw blade while it is running!
Wear protective gloves.
Attention! Before assembly, cleaning, modification, servicing, storage and transport, the
device must be switched off and disconnected from the power supply.
Saw band direction
The product complies with the applicable European directives.
The product complies with the applicable Serbian directives.
28 | GB www.scheppach.com