Operation - Bosch MUM48RE Gebrauchsanleitung

en

Operation

Risk of injury!
Do not insert mains plug until all prepara-
tions for working with the appliance are
complete.
Attention!
Do not operate the appliance without an
accessory/tool in the operating position.
Do not operate the appliance empty.
Do not expose appliance or accessories to
heat sources. Parts are not microwave-safe.
Before operating the appliance and

accessories for the first time, clean
thoroughly; see "Cleaning and servicing".
Preparation
Place the base unit on a smooth, clean

surface.
Pull out the power cord (Fig.=).

Insert the mains plug.

Stirrer, whisk and kneading
hook
Stirrer (a)
for stirring dough, e.g. cake mixture
Whisk (b)
for whisking egg whites, cream and light
dough, e.g. sponge mixture
Kneading hook (c) with dough deflector (d)
for kneading heavy dough and mixing-in
ingredients that ought not be cut (e.g. raisins
and chocolate chips)
Risk of injury from the rotating tools!
While the appliance is operating, never
place fingers in the mixing bowl.
Do not change tools until the drive has
come to a standstill – when the appliance
is switched off, the drive continues running
briefly.
The appliance may only be operated when
the unused drives have been safeguarded
with the drive covers.
14
Set rotary switch to P and hold in place

until the drive stops.
Note:
If the drive does not move, the swivel
position has already been reached.
Press the Release button and move

the swivel arm to position 6.
Insert the bowl. The base of the mixing

bowl must be inserted into the recess
of the base unit.
Depending on the processing task, insert

the stirrer, whisk or kneading hook until
it locks into position. If using the kneading
hook, rotate the dough deflector until
the kneading hook can lock into position.
Put the ingredients to be processed into

the bowl.
Press the Release button and move

the swivel arm to position 1.
Attach the cover.

Set the rotary switch to the desired

setting.
Adding more ingredients
Switch off the appliance with the rotary

Fig.
switch.

Set rotary switch to P and hold in place

until the drive stops.
Remove lid.

Press the Release button and move the

swivel arm to position 7.
Add ingredients

or
add more ingredients through the feed

tube in the cover.
After using the appliance
Switch off the appliance with the rotary

switch.
Set rotary switch to P and hold in place

until the drive stops.
Remove mains plug.

Remove lid.

Press the Release button and move

the swivel arm to position 6.
Take the tool out of the drive.

Remove the bowl.

Clean all parts, see "Cleaning and

servicing".
Robert Bosch Hausgeräte GmbH